5Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
203
Direct purchase from the factory 
Tuta Solutio
Donum Gratis
Politica Missilis
Politica ReditusDonum Gratis
Salve ad Roymall, tuum destinatum ad dona premium. Gratias agimus pro tuo auxilio, et offerimus donum gratis cum omni emptione. Paratus ad explorandum nostram collectionem? Perlege nostra selectio, fac ordinationem tuam, et expecta donum tuum gratis cum emptione.Politica Missilis
Processamus ordinationes intra 2 dies.Norma missilis tempus est 5-7 dies laboris.Tempus missilis potest variari secundum destinationem.1. Politica Reditus
Accipimus solum res emptas ex roymall.com. Donum gratis non potest reddi. Res debet esse non usata et in originali packaging.Processamus reditus intra 3-5 dies laboris post receptionem.Res personalisatae non possunt reddi.Contacta nos: service@roymall.com vel Whatsapp: +86193598494712.Politica Pecuniae Redditae
Accipies plenam pecuniam redditam post receptionem et inspectionem. Sumptus missilis non redditur.Contacta nos: service@roymall.com vel Whatsapp: +8619359849471
5Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
Description:
Charging method: linear charge 1%
Charging current: 1A adjustable
Charge accuracy: 1.5%
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indicator: Red charging green full charge
Charging input interface: Mini USB
Working temperature: -10°C to +85°C
Reverse: NO
Size: 25 x 19 x 10mm
Note:
Ampere meter can only be connected to 5V input end of the module.
It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
The connection wire should not be too long.
Make sure the connect point is good.
If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
Applications:
This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
Package included:
5 x 1A lithium battery charging module
Description:
Charging method: linear charge 1%
Charging current: 1A adjustable
Charge accuracy: 1.5%
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indicator: Red charging green full charge
Charging input interface: Mini USB
Working temperature: -10°C to +85°C
Reverse: NO
Size: 25 x 19 x 10mm
Note:
Ampere meter can only be connected to 5V input end of the module.
It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
The connection wire should not be too long.
Make sure the connect point is good.
If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
Input reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
Applications:
This module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
Package included:
5 x 1A lithium battery charging module
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
nt
nt
